No products in the cart.
Blackmagic Design
Blackmagic Design Micro Converter HDMI to SDI with Power Supply (CONVCMIC/HS)
Availability:
Out of stock
Product Highlights
- HDMI Input
- 2 x SDI Outputs
- Supports SD and HD Signals
- Automatic Input Signal Detection
- Software Control
- Power & Firmware Updates via USB 2.0
- International Power Supply Included
Uporedi
Product Highlights
- HDMI Input
- 2 x SDI Outputs
- Supports SD and HD Signals
- Automatic Input Signal Detection
- Software Control
- Power & Firmware Updates via USB 2.0
- International Power Supply Included
Related products
-
Blackmagic Design
JVC Outdoor Housing for PTZ Dome Camera (KST-OH100CM-POE) + KSTDBH07 ceiling mount
Outdoor-Housing for KY-PZ100 PTZ-Cameras incl. DBH-07 ceiling-mount — – Camera-Housing protection class IP64 standard —- POE injector/splitter 90W — 2,5m cable-set SDI, HDMI, POE-Lan, 240VAC f.Injector
eatures
- Outdoor-Housing for KY-PZ100 PTZ-Cameras
- incl. DBH-07 ceiling-mount
- POE injector/splitter 90W
- Comes with 2,5m cable-set SDI, HDMI, POE-Lan, 240VAC f.Injector
- Sun and weather protection shield
- IP64 rated
- Maximum protection against environmental influences such as dust, smog, salt, moisture and insects
- Transparent hi-res dome
- Air intake with protective filter
- Active heating and ventilation
SKU: KSTOH100CMPOE -
Blackmagic Design
JVC Pole-Mount-Adapter for one/two KSTDBH06 (supports 80-150mm Poles)
The pole mount adapter PTC1 is combined with the wall bracket DBH06. It allows the installation of the system on poles with diameters of 80mm-150mm. Load capacity up to 50kg It is possible to mount 2 DBH06 opposite
SKU: KSTPTCC1 -
Blackmagic Design
JVC Standard Mounting Tool for Outdoor Housing (KST-DBH06)
The wall mount DBH06, made of aluminum, serves as a base for special mounting adapters shown below. The connecting cables of the camera system are hidden and protected by the arm. Load capacity up to 25kg ( included in KST-OH100WM versions )
SKU: KST-DBH06 -
Blackmagic Design
JVC Pan-Tilt Camera with Overlay Streaming
JVC’s first robotic pan, tilt and zoom video production camera, the KY-PZ100, features JVC’s unique IP communications engine, providing network connection via Wi-Fi, 4G/LTE or LAN. Ideal for studio or field use, the PTZ camera offers all the IP connectivity from JVC’s range of live streaming camcorders, plus a unique built-in graphics overlay capability, with full screen graphics ideal for robotic applications.
Features
- Broadcast Info Overlay
- Saves overlay info at every preset position (up to 10)
- Broadcaster logos, “Live” mark, watermark, time and temperature can be overlaid.
- Full-Screen Graphics Overlay and Slide Show
- Up to 50 full-screen (max. 23MB) custom graphics
- Various language characters supported with provided software SDP Generator.
- Selectable pre-loaded logos.
- 3G-SDI and HDMI digital outputs
- Optical zoom lens with 30x zoom ratio (4.3-129mm, f/1.6~4.7)
- Robotic pan, tilt and zoom
- Full HD 1080p, 1080i, 720p video
- 1/2.8-inch CMOS sensor (2.2 million pixels)
- 2 channels audio (or 1 channel balanced audio w/phantom power)
- USB host connection for WiFi or 4G LTE adapter
- Can memorize 100 preset settings and positions
- IR controller
- Can be mounted upside-down or right-side-up
- Remote control via RS-232C / RS-422, or via IP controller
- Micro SDHC/SDXC memory card recording
- LAN connector supports Power over Ethernet
- Advanced IP communications capability:Streaming with SMPTE 2022 forward error correction. Advanced Zixi reliable communication with ARQ, FEC and adaptive bitrate control. Low latency streaming. RTMP streaming directly to content delivery network (YouTube, Ustream, etc.)
SKU: n/a
